When the machine is cleaned, it is not too tight when installing the adjusting nut. The adjustment nut has the function of tighter and tighter. Too tight will result in the pressure between the blades too tight, but the machine can not operate normally.
The fresh meat can not be frozen meat and bone containing meat, so as not to damage the knife set.
The cut length of fresh meat chopper is not limited, its width, thickness, slice thickness
sl-92 ≤145mm ≤40mm ≤5.0mm
Sl-92 < < 145mm > 40mm < 5.0mm
When the surface of the cutting machine is rough and the efficiency is low, it is necessary to check the blade of the slicer to be perfect. If there is a gap, the knife group should be replaced in time, or the adjustment and replacement should be made. Be careful not to cause unnecessary injury when replacing.
When the machine is jammed too large during the work, the emergency stop should be pressed as soon as possible, so as to prevent the motor from overheating and burn the machine.
The machine needs to run for 1-2 minutes after starting, to observe whether there are abnormal phenomena (such as noise, smell, knife operation, etc., and see if the parts are too loose). After the operation, the material can be entered from the inlet.
In order to ensure better shredding effect, the fresh meat shredder should be placed in the middle of the feed as far as possible. When the machine is used, the power supply should be lifted, and the electric power should not be charged for a long time. The machine should be placed in a clean and ventilated place, which is not easy to cause the electricity to be dampened, in order to prevent the accident from electric shock.
This article from the cut silk slicing machine friendship dedication. More related knowledge please click: http://www.chinafoodjx.com we will use the most advanced technology. The most sincere attitude. To provide you with the most comprehensive service. More related knowledge we will continue to dedicate to you. Please look forward to.