全国咨询热线
冻肉切丁机的特点及优势
Characteristics and advantages of frozen meat Dicer
产品特点：
Product features:
1.切丁、切丝机结构紧凑，采用优化卫生设计，
1. The Dicer and shredder are compact in structure and adopt optimized sanitary design,
2. 机壳，切割刀栅均采用不锈钢材料制成，
2. The casing and cutting grid are made of stainless steel,
3.切刀采用双面刃切削，工作效率高，
3. The cutter adopts double-sided cutting edge, which has high working efficiency,
4.切割的肉丁规格3mm30mm。
4. The size of diced meat cut is 3mm to 30mm.
5.调整厚度切割旋纽，可对推杆进行无级调速，使肉料推杆进行推进速度变化，以达到不同切割厚度的要求。
5. By adjusting the thickness cutting knob, the push rod can be steplessly adjusted to change the pushing speed of the meat push rod, so as to meet the requirements of different cutting thicknesses.
6.采用了预压力旋钮设计，保证切割过程中肉丁块状均匀。产品切割过程中始终如一。
6. The pre pressure knob design is adopted to ensure that the diced meat is even during the cutting process. The product cutting process is consistent.
7.单刃切割时，肉料推杆作步进运动，保证切割尺寸正确。
7. When cutting with a single edge, the meat pusher moves step by step to ensure the correct cutting size.
8.调整肉料推杆为步进运动，采用单刃切割时可限度地减少在切割过程中对产品的挤压。
8. Adjust the meat pusher to step motion. When using single blade cutting, the extrusion of products in the cutting process can be minimized.
9.切割槽一侧采用活动侧压结构，方便加料，提高工作效率。
9. One side of the cutting groove adopts a movable side pressure structure, which is convenient for feeding and improves work efficiency.
10.每次切割完肉料，存料几乎为零。
10. Every time the meat is cut, the stock is almost zero.
11.本机可适应-5℃常温肉料正常切割，是肉食品加工中的设备。
11. This machine can adapt to the normal cutting of meat from -5 ℃ to normal temperature. It is an equipment in meat food processing.
切丁机的工作原理：拨盘带动被切物体高速旋转，利用物体离心力，借助立刀将被切物体切成片状，然后经过圆盘切丝刀切成条状，并将被切物料送入横切断刀口，由横切断刀切成所需要的立方体或长方体切丁机工作一行程后，料仓存料约一到二毫米，刀片间隙几乎为零。
Working principle of the Dicer: the dial drives the object to be cut to rotate at a high speed. Using the centrifugal force of the object, the object to be cut is cut into pieces with the help of the vertical knife, and then the material to be cut is cut into strips through the disc wire cutter, and the material to be cut is sent to the horizontal cutting edge. The cutting knife cuts the required cube or cuboid. After the Dicer works for a stroke, the material in the silo is about 1-2 mm, and the blade gap is almost zero.
以上就是为大家介绍的有关切丁切块机的详细的介绍,希望对您有所帮助.如果您有什么疑问的话,欢迎联系我们.我们将以的态度,为您提供服务http://www.chinafoodjx.com/
The above is a detailed introduction to the Dicer and Dicer for you. I hope it will be helpful to you If you have any questions, please contact us We will provide you with professional service http://www.chinafoodjx.com/
