欢迎光临济南宏泰食品机械有限公司官方网站!

全国咨询热线
当前位置:首页 > 公司动态 > 业内资讯 >
切丝机摇柄与进刀位置不对应的误区
发布时间:2018-04-18 14:11:10 发布人:admin

  冷冻切片机是医院病理科必备的设备,用于手术中提取组织的快速冷冻切片,为手术提供病理依据。冷冻切片机的制冷温度在-30℃以下,加半导体制冷台,可使温度达到-50℃。

  Frozen slicing machine is a necessary equipment in hospital pathology department. It is used to extract tissue frozen sections quickly and provide pathological basis for surgery. The refrigeration temperature of the freezing slicing machine is below -30 and the semiconductor refrigeration platform can make the temperature reach -50 degrees.

  摇柄与进刀位置不对应,原因:机械传动部分错位,维修方法:调整对应位置后再安装皮带并拧紧定位卡,在运动摩擦部位加机油润滑。

  The rocking handle and the position of the knife do not correspond, the reason: the mechanical transmission part of the dislocation, maintenance method: after adjusting the corresponding position, then install the belt and tighten the positioning card, lubricating oil in the friction parts of the movement.

切丝切片机

  冷台温度显示错误代码F13、F7操作失灵,原因:冷台温度传感器失效。此传感器为负温度系数热敏电阻,25℃时电阻约为6kΩ,应急使用时可在P5插口上串10K电位器将冷台显示温度调成-40℃,或者直接拔去P5插头。除冷台温度显示“—”外,其他一切正常,不影响使用。

  The temperature display error code F13 and F7 operation failed. The reason is: the cold platform temperature sensor is invalid. The sensor is a negative temperature coefficient thermistor, and the resistance is about 6K Omega at 25 C. When using the P5, the 10K potentiometer can be used to adjust the temperature of the cold table to -40 C, or to pull the P5 plug directly. Except for the temperature of the cooling stand showing "-", everything else is normal, which does not affect the use.

  再从刀架上直接加工切刀片取下,擦拭干净后放置在刀盒内。

  Then the blade is removed directly from the tool carrier, cleaned and cleaned, and placed in the knife box.

  我们在使用切片刀的时候,一定要格外小心,因为其刀刃非常的锋利,如果误操作的话定会造成严重的伤害,不可以直接的用手去接触切刀片,也不可以将切刀片随意的乱放。

  When we use a slicer, we must be very careful because the blade is very sharp, and if the operation is wrong, it will cause serious damage. It is not possible to contact the blade directly with the hand, nor can the blade be randomly placed in random.

  本文由切丝切片机为您提供,我们的网站是:http://www.chinafoodjx.com我们将以全心全意的热情为您提供更优质的服务,欢迎您的访问!

  This article is provided by the cut silk slicing machine for you. Our website is: http://www.chinafoodjx.com we will provide you with more quality service and welcome your visit with wholehearted enthusiasm.

上一条 : 多功能切菜机规格不同在哪些地方?

下一条 : 冷凝结晶切片机进行开机检查的标准

曹经理
李经理
袁经理
4009909668