欢迎光临济南宏泰食品机械有限公司官方网站!

全国咨询热线
当前位置:首页 > 公司动态 > 业内资讯 >
冷凝结晶切片机进行开机检查的标准
发布时间:2018-04-16 15:03:24 发布人:admin

  冷凝结晶切片机是将加热的液体原料,通过不锈钢内冷却转辊在设备的料槽内转动粘带至前部的可调节式切片刀装置对其进行切片,从而完成的液体经冷却刀片转换为固体片料,也可对液体经冷却变为结晶体的原料进行切片。

  The condensing crystallizer is a liquid material that will be heated. Through the cooling roll of the stainless steel inside the material groove of the equipment, the adjustable slicer device that sticks to the front part is sliced, and the liquid is converted into solid material through the cooling blade, and the liquid can be sliced to the raw material that is cold but crystallized.

  广泛用于化工,制药等行业。通过切片机成型的原料,比其他粉碎型加工的原料,更提高产品的档次。而且,设备稳定性好,操作方便,切片料的厚度,产量可根据原料的特性。操作规程:

  It is widely used in chemical industry, pharmaceutical industry and other industries. The raw materials made from slicer can improve the grade of products better than other processed materials. Besides, the equipment is stable and easy to operate. The thickness and yield of sliced material can be based on the characteristics of raw materials. Operating procedures:

  1、 使用前,擦拭机器,面对切片机,先将载物台移至最右边,漏出加油口,向其中加5滴油,多次横向载物台,使润滑油均匀分布。

切丝切片机

  1, before using, wipe the machine, face the slicer, first move the carrier platform to the right, leak out the gas port, add 5 drops of oil, multiple horizontal load table, so that the lubricating oil is evenly distributed.

  2、 调节切割厚度,先将厚度调至最大,再调至需要厚度;调好后将夹具打开,放入物料,夹实,并落下重锤。

  2, adjust the cutting thickness, first adjust the thickness to the maximum, then adjust to the required thickness. After adjusting, the fixture is opened, put into the material, clamped and landed.

  3、 开机检查:检查刀片上是否有异物,检查刀具护板是否盖实,检查磨刀砂轮是否远离刀片。

  3, turn on the machine check: check whether there are foreign objects on the blade, check whether the guard plate is covered, check whether the grinding wheel is away from the blade.

  4、 检查无误后,接通电源,打开开关,让其自动运转,操作员不能远离设备,以防发生意外。

  4, after checking correctly, switch on the power, turn on the switch and let it run automatically, so the operator can't keep away from the equipment to prevent accidents.

  5、 结束后,先关闭开关,断电,取下废料及半成品,打开刀具护板,将刀片及载物台清理干净(小心刀片锋利)。

  5, after the end, turn off the switch, cut off the power, take off the scrap and semi-finished products, open the tool guard plate, clean the blade and the carrier (careful blade sharp).

  本文由切丝切片机友情奉献.更多有关的知识请点击:http://www.chinafoodjx.com我们将用最先进的技术.最真诚的态度.为您提供最为全面的服务.更多有关的知识我们将会陆续向大家奉献.敬请期待.

  This article from the cut silk slicing machine friendship dedication. More related knowledge please click: http://www.chinafoodjx.com we will use the most advanced technology. The most sincere attitude. To provide you with the most comprehensive service. More related knowledge we will continue to dedicate to you. Please look forward to.

上一条 : 切丝机摇柄与进刀位置不对应的误区

下一条 : 刀盘式切片机飞轮起到的作用

客服小波
客服小萍
4009909688