欢迎光临济南宏泰食品机械有限公司官方网站!

全国咨询热线
当前位置:首页 > 公司动态 > 业内资讯 >
如何对切丝切片机上的残屑进行清理?
发布时间:2018-03-08 13:57:50 发布人:admin

一、操作规程:
1. Operation rules:
1、 使用前,擦拭机器,面对切片机,先将载物台移至最右边,漏出加油口,向其中加5滴油,多次横向载物台,使润滑油均匀分布。
1, wipe the machine before use, face the slicing machine, move the loading platform to the far right first, leak out the filling port, add 5 drops of oil to it, and cross the loading platform many times, so that the lubricating oil is evenly distributed.
2、 调节切割厚度,先将厚度调至最大,再调至需要厚度;调好后将夹具打开,放入物料,夹实,并落下重锤。
2, adjust the cutting thickness, first the thickness to the maximum, then adjust to the required thickness; after the adjustment, the fixture is opened, put into the material, pinch, and drop heavy hammer.
3、 开机检查:检查刀片上是否有异物,检查刀具护板是否盖实,检查磨刀砂轮是否远离刀片。
3, open the machine check: check whether there is a foreign object on the blade, check the cutting tool plate or not, check whether the grinding wheel is far away from the blade.
4、 检查无误后,接通电源,打开开关,让其自动运转,操作员不能远离设备,以防发生意外。

切丝切片机
4. After the inspection is unmistakable, the power supply is switched on and the switch is opened to make it run automatically. The operator can not stay away from the equipment to prevent accidents.
5、 结束后,先关闭开关,断电,取下废料及半成品,打开刀具护板,将刀片及载物台清理干净(小心刀片锋利)。
5, after closing, turn off the switch first, cut off the electricity, remove the waste and semi-finished products, open the cutter guard plate, clean up the blades and the loading platform (be careful of razor blades).
二、注意事项
Two. Precautions
1、对手轮进行转动,将标本夹直接升至到最高的位置,并转动手轮将手柄停止转动,同时将标本夹和手轮都进行锁定。
1, turn the opponent wheel to the highest position and rotate the handwheel to stop the handle. Meanwhile, both the specimen clip and the handwheel are locked.
2、再从刀架上直接加工切刀片取下,擦拭干净后放置在刀盒内。
2, the cutting blade is processed directly from the tool holder, and then placed in the knife box.
3、从标本夹上将标本直接的取下。
3. Remove the specimen directly from the specimen folder.
4、对切片机上切片的残屑进行清理。
4. Cleaning the sliced chips on the slicer.
5、最后就是对切片机进行整机的清洁。
5, the last is to clean the whole machine for the slicer.
注意:我们在使用切片刀的时候,一定要格外小心,因为其刀刃非常的锋利,如果误操作的话定会造成严重的伤害,不可以直接的用手去接触切刀片,也不可以将切刀片随意的乱放。
Note: when we use the knife, must be very careful, because the blade is very sharp, if misuse of words will cause serious harm, can not directly hand to touch cutting blades, nor can be arbitrarily misplacing blade.
本文的精彩内容来自切丝切片机详细内容请点击我们的官方网站: http://www.chinafoodjx.com谢谢您的到来!
The wonderful content of this article comes from the detailed content of the cutting machine, please click on our official website: http://www.chinafoodjx.com thank you for coming!

上一条 : 不同规格的全自动切丁机工作效率不同

下一条 : 客户来厂订购切韭菜机/韭菜切段机(视频)切韭菜段机...

曹经理
李经理
袁经理
4009909668