欢迎光临济南宏泰食品机械有限公司网站!

全国咨询热线
切片机常见的故障有哪些?
发布时间:2022-03-26 来源:http://www.chinafoodjx.com 发布人:admin

冻肉切片机在生活中已是常见的一种食品设备了,在使用中,有时难免会出现一点故障,为了保证良好的使用效果,就要对其充分的了解故障原因,以便我们合理的进行避免和预防。
Frozen meat slicer has been a common food equipment in life. Sometimes there will be some faults in use. In order to ensure good use effect, we should fully understand the causes of the faults, so that we can reasonably avoid and prevent them.
1、机器不运转:检查插头接触是否良好,再检查插座保险是否熔断。仍不能排除故障则需由电气技术人员检修。
1. The machine does not work: check whether the plug is in good contact, and then check whether the socket fuse is blown. If the fault cannot be eliminated, it shall be overhauled by electrical technicians.
2、机体带电:须立即拔掉冻肉切片机电源插头,检查接地是否良好,找电气技术人员处理。
2. Electrified body: Unplug the power plug of frozen meat slicer immediately, check whether the grounding is good, and find electrical technicians to deal with it.


冻肉切片机的常见故障分析
Analysis of common faults of frozen meat slicer
3、切片效果不佳:检查刀片是否锋利;检查冻肉温度是否在0℃到-7℃范围;重新磨刀片刃口。
3. Poor slicing effect: check whether the blade is sharp; Check whether the temperature of frozen meat is in the range of 0 ℃ to - 7 ℃; Regrind the blade edge.
4、托盘走动不顺畅:走动圆轴加润滑油,调节走动方轴下方的顶紧螺丝。
4. The tray does not move smoothly: add lubricating oil to the moving round shaft and adjust the jacking screw under the moving square shaft.
5、工作时发出异响:检查机器螺栓是否松动,检查机器走动部分润滑油是否用完,检查刀片圆周有无碎肉。
5. Abnormal noise during operation: check whether the bolts of the machine are loose, whether the lubricating oil of the moving part of the machine is used up, and whether there is broken meat around the blade.
6、机器震动或有轻微噪声:检查工作台是否稳固,机器放置是否平稳。
6. Machine vibration or slight noise: check whether the workbench is stable and whether the machine is placed stably.
7、砂轮不能正常磨刀:清洁切片机的砂轮。
7. The grinding wheel cannot grind the knife normally: clean the grinding wheel of the slicer.
8、切片工作时,机器无力检查传动皮带是否沾有油污或断开,检查电容有无老化现象,检查刀片刃口是否锋利。
8. When slicing, the machine is unable to check whether the transmission belt is stained with oil or disconnected, whether the capacitor is aging, and whether the blade edge is sharp.
在使用冻肉切片机时,若遇到以上的故障,应立即停机检查相关配件,根据故障分析出具体原因,立即,让切片机的运行顺畅。
When using the frozen meat slicer, in case of the above faults, stop the machine immediately, check the relevant accessories, analyze the specific causes according to the faults, and solve them immediately to make the slicer run smoothly.
以上就是为大家介绍的有关切丝切片机的详细介绍,希望对您有所帮助.如果您有什么疑问的话,欢迎联系我们.我们将以的态度,为您提供服务http://wwwchinafoodjxcom/
The above is the detailed introduction of the slicer. I hope it will be helpful to you If you have any questions, please contact us We will provide you with professional service http://wwwchinafoodjxcom/

上一篇:如何选择一台好用的切辣椒机?
下一篇:切丁切块机可以对哪些食材进行加工?

相关新闻