全国咨询热线
切片机的外包装是不锈钢的，所以我们在日常使用的时候，应当特别注意不要使用过尖或者是过硬的东西碰到其表面，以免划伤。如果在使用一段时间之后，需要对切片机产品进行清洗的时候，工作人员应当同时卸上下的固定的螺丝，以免在拆掉一个螺丝的时候，发生危险，或者是损坏设备。
The outer package of the slicer is stainless steel, so we should pay special attention not to use too sharp or hard things to touch its surface in order to avoid scratching. If it is necessary to clean the slicer products after a period of use, the staff should remove the fixed screws at the same time, so as to avoid danger or damage to the equipment when removing one screw.
还要注意对切片机做好润滑护理，应当定期查看其的润滑情况，在添加润滑油的时候，应当保证油量充足，但不要过量。工作人员应当在每天的工作结束之后，及时将切片机内部是所有残留物料清理干净。并且要注意检查刀片的磨损情况，如果有问题的话，应及时修复或者是更换。另外，将工作现场清理干净，而且要注意切断设备的总电源。
Also pay attention to the lubrication care of the slicer. Check its lubrication regularly. When adding lubricating oil, ensure that the amount of oil is sufficient, but not excessive. The staff shall clean up all residual materials inside the slicer in time after the end of each day's work. And pay attention to check the wear of the blade. If there is a problem, it should be repaired or replaced in time. In addition, clean up the work site and pay attention to cutting off the main power supply of the equipment.
总之，在我们使用切片机的时候，不仅需要按照正确的要求进行操作，还应当尽可能为其提供一个安 全卫生的工作条件和工作环境，以保证切片机的工作性能得到充分发挥。
In short, when we use the slicer, we should not only operate according to the correct requirements, but also provide it with a safe and hygienic working condition and working environment as far as possible, so as to ensure that the working performance of the slicer can be brought into full play.
除此之外，要想达到良好的切割效果，还需要做好相关的调节工作，并及时更换磨损的刀片，实现切割效果。调节时先松开固紧铜柱螺母,其次转动螺母与铜柱上的厚薄方向调节，厚薄调妥后，必须把螺母与铜柱拧紧。
In addition, in order to achieve good cutting effect, it is also necessary to do relevant adjustment work, and replace the worn blade in time to achieve cutting effect. When adjusting, first loosen the nut fixing the copper column, and then rotate the nut to adjust the thickness direction on the copper column. After the thickness is adjusted properly, the nut and the copper column must be tightened.
更换切片机刀片的时候，需要用六角把手插入该机侧面孔位，转动可以调盘方向再换刀；换刀时松掉刀片的二只六角螺丝，插入刀片更换即可，确保切片效果的顺利完成。
When replacing the blade of the slicer, it is necessary to insert the hexagonal handle into the hole on the side of the slicer, turn the wheel direction, and then change the blade; When changing the knife, loosen the two hexagon screws of the blade and insert the blade for replacement to ensure the smooth completion of the slicing effect.
