全国咨询热线
现在市面上各式各样的机械设备变得越来越多，这其中也不乏一些精度高的机械设备，它们的出现是科技进步的印证，切片机是现在常见的一种设备，在使用它的时候要按时对其进行润滑。
Nowadays, there are more and more kinds of mechanical equipment on the market, among which there are some high-precision mechanical equipment. Their appearance is the confirmation of scientific and technological progress. Slicer is a common kind of equipment now, and it should be lubricated on time when using it.
切片机中需要润滑的部位有不少，采用的润滑介质也是有区别的，比如说它的离合器、弹簧、链轮张紧装置、往返运动部位导轴、开合机构等部位的润滑加黄油。
There are many parts in slicer that need to be lubricated, and the lubricating medium used is also different, for example, the lubrication of its clutch, spring, sprocket tensioning device, back and forth moving parts, guide shaft, opening and closing mechanism, etc.
而切片机中的位块凸轮装置、主传动室润滑要加机油，且半年换1次机油，由视窗油的清澈程度决定；角度分割器润滑每半年1次；空压机润滑，三个月加1次。
The position block cam device and the main transmission chamber of the slicer need to be lubricated with oil, and the oil should be changed once a half year, which is determined by the clarity of the window oil; The angle divider is lubricated once every half a year; Air compressor lubrication, add once every three months.
除了润滑之外，在使用它的时候，还要留意防尘和清洁、电气方面的故障。除了这些以外，它的换油也是很重要的，要保障平台的四角度与上净平台之间的间隔，只有保持正确的间隔，才能使机器正常的运转。
In addition to lubrication, in the use of it, but also pay attention to dust and cleaning, electrical failure. In addition to these, its oil change is also very important. To ensure the spacing between the four angles of the platform and the upper clean platform, only by maintaining the correct spacing can the machine operate normally.
在切片机切片时，还要注意不要将大量的废纸边、纸毛弄进链条传动部位、模切部动平台及一些其它的旋转部位，以免造成运转故障，损害切片机，如果在日常使用它的时候不能较好的保养机器，不但会额外的增加维修机器的开支，对机器的损害也很大。
In the slicer slicing, but also pay attention not to get a lot of waste paper edge, paper wool into the chain drive parts, die-cutting part moving platform and some other rotating parts, in order to avoid causing operation failure, damage slicer, if in daily use it can not better maintenance machine, not only will increase the cost of maintenance machine, the damage to the machine is also great.
