欢迎光临济南宏泰食品机械有限公司官方网站!

全国咨询热线
当前位置:首页 > 公司动态 > 业内资讯 >
切年糕机的使用注意事项有哪些?
发布时间:2021-03-24 17:28:11 来源:http://www.chinafoodjx.com 发布人:admin

年糕机采用电加热电子自动控温煮浆新工艺,通过水浴蒸煮方式使米浆受热变性,增粘聚合,螺杆推揉挤压成型,出机即熟,连续进料连续出糕,做出的年糕洁白光滑,口感细腻有弹性,解决了手工制作年糕工序复杂、费时费力的缺点.
The rice cake machine adopts the new technology of electric heating and electronic automatic temperature control to make the rice pulp denatured by water bath steaming, tackifying and polymerizing, screw pushing, kneading and extruding, and then it is cooked out of the machine. The rice cake is white and smooth with delicate and elastic taste, which solves the shortcomings of complicated and time-consuming manual production process
年糕机的操作注意事项:
Notes on operation of rice cake machine:
1、机器须安装在平整硬化的地年糕,按地线标志接地线,运转时不可用木棒等工具协助入年糕,以上不不安全操作行为易导致人身伤害和机器损坏。
1. The machine should be installed on the flat and hardened ground cake, and the ground wire should be marked according to the ground wire. Wooden sticks and other tools should not be used to assist the machine to enter the cake during operation. The above unsafe operation will easily lead to personal injury and machine damage.
2、开机前应查看轧辊年糕和丝刀上无年糕类以外的其它杂物,尤其使用的摸布,毛刷等。机器运转时极易将手带入辊内,擦拭机器必须断电源。
2. Before starting the machine, check that there are no other sundries except rice cake on the roll rice cake and silk knife, especially the cloth and brush used. When the machine is running, it is very easy to bring the hand into the roll, and the power supply must be cut off to wipe the machine.


3、新机器进行空载磨合可延长使用寿命,磨合时轧年糕辊及丝刀表年糕涂食用油,丝刀两端油孔及丝刀齿轮和侧罩内齿轮年糕滴机械油4、机器试运转或磨合时观察有异常噪音应及时排除,注意少滴勤滴,磨合时间在1小时以上,应选用同一型号及质量级别,不可代用。
3. No load running in of the new machine can prolong its service life. When running in, the rice cake roll and the rice cake on the surface of the wire cutter are coated with edible oil, and the oil holes at both ends of the wire cutter, the gear of the wire cutter and the inner gear of the side cover are coated with mechanical oil. 4. When the machine is running in or running in, the abnormal noise should be eliminated in time, and the running in time should be more than 1 hour Use.
5、碎年糕头不能直接放入年糕斗,应用拌年糕机打碎。本机重要零件为轧年糕辊与丝刀,更换时应用原厂件。
5. The head of broken rice cake can not be directly put into the rice cake bucket, so it should be broken by rice cake mixer. The important parts of this machine are rice cake rolling roll and wire cutter. The original parts should be used when changing.
6、用毕应将机器清理干净,尤其轧辊年糕丝刀上,残存的干年糕渣等将使辊年糕轧出和破坏丝刀。
6. After use, the machine should be cleaned up, especially on the New Year cake cutter. The remaining dry rice cake residue will make the New Year cake rolled out and destroy the cutter.
7、切条丝刀的放入与取出必须在切断电源时操作,严禁用手触摸丝刀等运转件,防止发生伤人事故。
7. The insertion and removal of the wire cutter must be operated when the power supply is cut off. It is strictly forbidden to touch the wire cutter and other operating parts with hands to prevent personal injury.
8、本机所运转部位轴承及所有电器原件经严格筛选,用户在更换时,每年更换一次轴承润滑油脂。
8. The running parts of the bearing and all electrical components of the machine have been strictly screened. When the user changes the bearing grease once a year.
文章链接:食品机械设备网 https://www.foodjx.com/tech_news/detail/346680.html
Article link: food machinery and equipment network https://www.foodjx.com/tech_ news/detail/346680.html

上一条 : 切丁切块机原理及主要功能特点

下一条 : 抱歉暂无数据

相关新闻

曹经理
李经理
袁经理
4009909668