欢迎光临济南宏泰食品机械有限公司官方网站!

全国咨询热线
当前位置:首页 > 公司动态 > 业内资讯 >
冻肉切丁机是如何进行日常保养?
发布时间:2020-09-04 16:59:26 来源:http://www.chinafoodjx.com 发布人:admin

冻肉切丁机液体输送部件在香肠加工设备中的应用是较多的,对于此类部件,日常清洗时,要求用清水在管路内多次循环,保证清洗质量。

  Application of frozen meat dicing machine liquid conveying parts in sausage processing equipment is more, for such parts, daily cleaning requirements, with water repeatedly in the pipeline to ensure the quality of cleaning.

  总之,香肠加工设备传动系统的维护保养工作强调的是洁净、润滑,要勤检查、勤清洗、勤整理、勤更换,是传动系统始终处于良好的工作状态。

  In conclusion, the maintenance work of the sausage processing equipment transmission system emphasizes cleanliness, lubrication, frequent inspection, frequent cleaning, frequent cleaning and frequent replacement. The transmission system is always in good working condition.

  冻肉切丁机轴承和滑动、旋转摩擦面等要选用食品级的润滑油脂来润滑,但不允许润滑油流入食品内。

  Frozen meat dicing machine, rotary bearing and sliding friction surface to use food grade grease to lubricate, but does not allow the lubricating oil into food.

  冻肉切丁机清洁、检查并保证密封件的完好功效,也是传动系统维护保养不可缺少的工作。

  Meat dicing machine cleaning, check and ensure that the seal is good effect, the transmission system maintenance job.

  冻肉切丁机与肉直接接触的传动部件需要经常拆卸、清洗消毒,还需同时检查其磨损程度,如有磨损及时更换。

  Transmission parts in direct contact with meat and meat dicing machine needs regular removal, cleaning and disinfection, it needs to check the degree of wear, such as wear change in time.

  1、操作前将设备放置在水平地面,确保机器放置平稳可靠;确定设备插头接触良好,无松动,无水迹;

  1, before operation, the equipment is placed on the horizontal ground to ensure that the machine is placed smoothly and reliably; it is sure that the contact plug is in good contact, no loosening and no water trace.

  2、检查旋转料筒内或输送带上是否有异物,如有异物必须清理干净,以免引起刀具损坏;

  2, check whether there are foreign objects in the rotary barrel or conveyor belt, such as the foreign objects must be cleaned up so as not to cause the tool damage.

  3、操作、调整根据所需加工的菜类选择切割模式,离心切片机用于瓜薯类硬菜的切片,竖刀部分可将叶类软菜或切好的片加工成不同规格的块、丁、菱形等各种形状;

  3, operation and adjustment. According to the processed dishes, we choose the cutting mode. The centrifugal slicer is used for slices of hard potatoes, and the vertical part can be processed into various shapes such as blocks, diamonds, rhombus and so on.

  4、安装竖刀,先转动可调偏心轮,使刀架行至下死点后,再使刀架向上抬起1-2毫米,使竖刀与输送带接触后,紧固螺母把竖刀紧固在刀架上。如果刀架抬起高度小,蔬菜有可能连刀,如果刀架抬起高度过大,有可能切坏输送带;

  4, install the vertical knife, rotate the adjustable eccentricity wheel first, make the tool carriage reach the bottom dead center, and then raise the tool holder up to 1-2 millimeters, so that after the vertical cutter contacts the conveyor belt, the fastening nut can fasten the vertical knife on the tool carrier. If the height of the knife lift is small, the vegetables may be connected with the knife, and if the height of the tool holder is too high, it may be able to cut the conveyor belt.

  公司全方位服务于客户,以质量上乘、价格合理和完善的售后服务与客户携手奋进,共同发展。质量保证,欢迎咨询洽谈。

  The company serves the customer in all directions, with the high quality, the reasonable price and the perfect after sale service and the customers to advance hand in hand, and develop together. Quality assurance, welcome to consult the negotiation.

上一条 : 切辣椒丝机设备有哪些特点?

下一条 : 抱歉暂无数据

相关新闻

曹经理
李经理
袁经理
4009909668