全国咨询热线
1、操作前将切丝机放置在水平地面，确保切丝机放置平稳可靠;确定切丝机插头接触良好，无松动，无水迹;
1, before operation, the cutting machine is placed on the horizontal ground to ensure that the cutting machine is placed smoothly and reliably; it is sure that the plug contact of the cutting machine is good, no loosening and no water trace.
2、检查旋转料筒内或输送带上是否有异物，如有异物必须清理干净，以免引起刀具损坏;
2, check whether there are foreign objects in the rotary barrel or conveyor belt, such as the foreign objects must be cleaned up so as not to cause the tool damage.
3、操作、调整根据所需加工的种类选择切割模式，离心切片机用于瓜薯类硬菜的切片，竖刀部分可将叶类软菜或切好的片加工成不同规格的块、丁、菱形等各种形状;
3, operation and adjustment according to the type of processing needed to choose the cutting mode. The centrifugal slicer is used for slicing the hard potato slices, and the vertical part can be processed into various shapes such as blocks, diamonds, rhombus and so on.
4、安装竖刀，先转动可调偏心轮，使刀架行下死点后，再使刀架向上抬起1-2毫米，使竖刀与输送带接触后，紧固螺母把竖刀紧固在刀架上。如果刀架抬起高度小，蔬菜有可能连刀，如果刀架抬起高度过大，有可能切坏输送带;
4, install the vertical knife, rotate the adjustable eccentricity wheel first, make the tool carriage reach the bottom dead center, and then raise the tool holder up to 1-2 millimeters, so that after the vertical cutter contacts the conveyor belt, the fastening nut can fasten the vertical knife on the tool carrier. If the height of the knife lift is small, the vegetables may be connected with the knife, and if the height of the tool holder is too high, it may be able to cut the conveyor belt.
本文的精彩内容来自切丝切片机详细内容请点击我们的网站: http://www.chinafoodjx.com谢谢您的到来!
The wonderful content of this article comes from the detailed content of the cutting machine, please click on our official website: http://www.chinafoodjx.com thank you for coming!
