全国咨询热线
切片机的外包装是不锈钢的，所以我们在日常使用的时候，应当注意不要使用过尖或者是硬的东西碰到其表面，以免划伤。如果在使用一段时间之后，需要对切片机产品进行清洗的时候，工作人员应当同时卸上下的固定的螺丝，以免在拆掉1个螺丝的时候，发生危险，或者是损坏设备。
The outer package of the slicer is made of stainless steel, so when we use it everyday, we should pay attention not to touch its surface with sharp or hard things to avoid scratches. If it is necessary to clean the slicer products after a period of use, the staff shall remove the fixed screws at the same time, so as to avoid danger or damage to the equipment when removing one screw.
还要注意对切片机做好润滑护理，应当定期查看其的润滑情况，在添加润滑油的时候，应当保持油量足，但不要过量。工作人员应当在每天的工作结束之后，及时将切片机里面是残留物料清理干净。并且要注意检查刀片的磨损情况，如果有问题的话，应及时修理或者是更换。另外，将工作现场清理干净，而且要注意切断设备的总电源。
We should also pay attention to the lubrication care of the slicer, check its lubrication condition regularly, and keep enough oil when adding lubricating oil, but not excessive. The staff should clean up the residual materials in the slicer in time after the end of each day's work. And pay attention to check the wear of the blade, if there is a problem, it should be repaired or replaced in time. In addition, the work site shall be cleaned and the main power supply of the equipment shall be cut off.
总之，在我们使用切片机的时候，不但需要按照正确的要求进行操作，还应当尽可能为其提供一个卫生的工作条件和工作环境，以让切片机的工作性能得到发挥。
In a word, when we use the slicer, we not only need to operate according to the correct requirements, but also should provide a hygienic working condition and working environment for it as far as possible, so that the working performance of the slicer can be brought into play.
除此之外，要想达到良好的切割作用，还需要做好相关的调节工作，并及时换磨损的刀片，实现切割作用。调节时先松开固紧铜柱螺母,其次转动螺母与铜柱上的厚薄方向调节，厚薄调妥后，要把螺母与铜柱拧紧。
In addition, in order to achieve a good cutting effect, we need to do a good job in the relevant adjustment work, and timely change the worn blade to achieve the cutting effect. When adjusting, first loosen and tighten the copper post nut, then turn the nut to adjust the thickness direction on the copper post. After the thickness is adjusted properly, tighten the nut and the copper post.
换切片机刀片的时候，需要用六角把手插到该机侧面孔位，转动可以调盘方向再换刀；换刀时松掉刀片的二只六角螺丝，插到刀片更换就行，包装切片作用的顺利完成。
When changing the blade of the slicer, it is necessary to insert the hexagonal handle into the hole on the side of the slicer, rotate it to adjust the direction of the wheel, and then change the blade; when changing the blade, loosen the two hexagon screws of the blade, insert it to replace the blade, and the function of packaging and slicing is completed smoothly.
