全国咨询热线
切片机的作业原理也很简单，是利用冷却的滚筒对会冷凝结晶的物料进行结片，再经过锋利的刀片刮片，然后把片按照相应的大小来进行铲出，这样可以很好的来进行生产或者是进行相应的活动。
The operation principle of the slicer is also very simple. It is to use the cooled drum to flake the materials that will condense and crystallize, then scrape them with a sharp blade, and then Shovel them out according to the corresponding size. In this way, it can be well used for production or corresponding activities.
此设备在我们生活中的应用是很多的，而它的种类也有很多，冷凝结晶也是有切片机的，用的是转鼓式的切片机。这个切片机主要是由滚筒、机架、刀片、传动部分、机壳等一些组成的，利用滚筒运转，起到一个飞轮的作用，然后通过刀片铲出不规则片，可以很快的进行切片了。
This equipment has many applications in our life, and there are many kinds of it. There is also a slicer for condensation crystallization, and a drum slicer is used. This slicer is mainly composed of drum, frame, blade, transmission part, casing, etc. it uses the drum to operate and play the role of a flywheel, and then shovel irregular pieces through the blade to slice quickly.
要说设备配套的刀片，还是要是具体切的是什么物质，因为不同的物质所对应的刀片和切片机都是不一样的。刀片材质有：铜、不锈钢、锰钢、四氟乙烯、胶木、钢带，针对不同物质的硬度和化学特性来选择各个适合自己的刀片。
To say the blade matched with the equipment, or what material is cut, because the blade and slicer corresponding to different materials are different. The blade materials include: copper, stainless steel, manganese steel, tetrafluoroethylene, bakelite and steel strip. Each suitable blade is selected according to the hardness and chemical characteristics of different substances.
切片机的外包装是不锈钢的，所以我们在日常使用的时候，应当特注意不要使用过尖或者是过硬的东西碰到其表面，以免划伤。如果在使用一段时间之后，需要对切片机产品进行清洗的时候，工作人员应当同时卸上下的固定的螺丝，以免在拆掉一个螺丝的时候，发生危险，或者是损坏设备。
The outer package of the slicer is stainless steel, so we should pay special attention not to use too sharp or hard things to touch its surface in order to avoid scratching. If it is necessary to clean the slicer products after a period of use, the staff should remove the fixed screws at the same time, so as to avoid danger or damage to the equipment when removing one screw.
