欢迎光临济南宏泰食品机械有限公司官方网站!

全国咨询热线
当前位置:首页 > 公司动态 > 宏泰集团动态 >
谈谈关于切片机各个位置的润滑和保养
发布时间:2021-08-20 16:58:24 来源:http://www.chinafoodjx.com 发布人:admin

现在市面上各式各样的机械设备变得越来越多,这其中也不乏一些精度高的机械设备,它们的出现是科技进步的印证,切片机是现在常见的一种设备,在使用它的时候要按时对其进行润滑。
Now there are more and more various mechanical equipment on the market, including some high-precision mechanical equipment. Their emergence is the confirmation of scientific and technological progress. Slicer is a common equipment, and it should be lubricated on time when it is used.
切片机中需要润滑的部位有不少,采用的润滑介质也是有区别的,比如说它的离合器、弹簧、链轮张紧装置、往返运动部位导轴、开合机构等部位的润滑加黄油。
There are many parts that need lubrication in the slicer, and the lubrication media used are also different, such as the lubrication and grease of its clutch, spring, sprocket tensioning device, reciprocating guide shaft, opening and closing mechanism, etc.


而切片机中的位块凸轮装置、主传动室润滑要加机油,且半年换1次机油,由视窗油的清澈程度决定;角度分割器润滑每半年1次;空压机润滑,三个月加1次。
The lubricating oil of the position block cam device and the main transmission chamber in the slicer shall be added, and the oil shall be changed once every six months, which is determined by the clarity of the window oil; Lubricate the angle divider once every half a year; Air compressor lubrication, once every three months.
除了润滑之外,在使用它的时候,还要留意防尘和清洁、电气方面的故障。除了这些以外,它的换油也是很重要的,要保障平台的四角度与上净平台之间的间隔,只有保持正确的间隔,才能使机器正常的运转。
In addition to lubrication, pay attention to dust prevention, cleaning and electrical faults when using it. In addition to these, its oil change is also very important. It is necessary to ensure the spacing between the four angles of the platform and the cleaning platform. Only by maintaining the correct spacing can the machine operate normally.
在切片机切片时,还要注意不要将大量的废纸边、纸毛弄进链条传动部位、模切部动平台及一些其它的旋转部位,以免造成运转故障,损害切片机,如果在日常使用它的时候不能较好的保养机器,不但会额外的增加维修机器的开支,对机器的损害也很大。
When slicing with the slicer, pay attention not to put a large number of waste paper edges and paper wool into the chain drive part, the moving platform of the die cutting part and some other rotating parts, so as to avoid operation failure and damage to the slicer. If the machine is not well maintained during daily use, it will not only increase the cost of repairing the machine, but also cause great damage to the machine.

上一条 : 针对什么来选择合自己的切片机刀片?

下一条 : 切丝切片机中容易损坏的地方是什么?

相关新闻

曹经理
李经理
袁经理
4009909668