切丁机指适用于脱水蔬菜、速冻蔬菜加工厂、果冻仙草蜜等软质食材及食物酱菜职业加工各种根、茎类蔬菜成正方体及长方体形状的机器总称。
Dicing machine refers to the machine that is suitable for processing soft food materials such as dehydrated vegetable, quick-frozen vegetable processing plant, jelly, fairy grass honey and food pickles, and for processing various root and stem vegetables into cuboids and cuboids.
切丁部件由一把切片刀，一组圆刀轴以及一组横切刀轴组成。 替换圆刀轴、横切刀轴以及调整切片厚度能够完结切开不同 尺度丁的转化。
The cutting part is made up of a slicing knife, a set of round cutter axes and a set of crosscutting cutter shafts. Replacement of circular cutter shaft, crosscutting cutter shaft and adjusting slice thickness can finish the transformation of different scales.
切丁机怎么保证运用？
How to ensure safe operation of the chop machine?
尽管切丁机是一款常见的食物加工设备，且有着相应的高质量优势，但在运用该机器设备的时分，若不留意操作方法，或者是电源方面有所反常，那么，毛病和风险也就会随时发作。对此来说，咱们要怎么保证该机器设备的运用呢？
Although the dicing machine is a common food processing equipment, and has the corresponding high quality advantages, but when using the machine and equipment, if you do not pay attention to the operation method, or the power supply is abnormal, then the problems and risks will occur at any time. In this regard, how can we ensure the safe operation of the machine?
其实，要保证该机器设备的运用，咱们能够从两方面来留意。榜首方面就是相应的外部条件，比方电源，机器整体体系的状况等等，这些状况的完好无缺，则有利于切丁作业。而第二方面，就是作业人员的操作状况了，的操作，无任何不利行为的呈现，就是保证该机器设备正常，运用的好方法。
In fact, to ensure the safe use of the machinery and equipment, we can pay attention from two aspects. Top of the list is the corresponding external conditions, such as power supply, the overall system of the machine and so on. If these conditions are intact, it will be conducive to the dicing operation. The second aspect is the operation status of operators, professional operation, no adverse behavior, is to ensure the normal and safe use of the machine and equipment.
因此来说，在运用这一切丁机的时分，保证，就是以上所说到的外部条件的留意以及作业人员自操作技能的保证。当然，物料方面的状况也不得忽视。
Therefore, in the use of all the time, to ensure safety, that is, the above mentioned external conditions of attention and the operator's self-professional operation skills to ensure. Of course, the status of materials can not be ignored.
仔细查看切丁机是否存在缺、损、松问题，保证机器处于完好状况。
Check carefully whether there is any shortage, loss and loosening problem of the chop machine to ensure that the machine is in good condition.
查看壳体内是否有异物存在，将壳体内异物去，不然简单引起刀片的损坏。
Check whether there is any foreign body in the shell, and remove the foreign body in the shell, otherwise it will simply cause the damage of the blade.

整理操作场所，查看电源电压是否与本机运用电压相符，接志处是否牢靠衔接地线。
Clean up the operation site, check whether the power supply voltage is consistent with the local operating voltage, and whether the grounding mark is firmly connected to the grounding wire.
合上开关，按下“开”按钮，查看转向是否正确（面对推料拨盘，推料拨盘逆时针方向旋转为正确），不然，堵截电源调整接线。
Close the switch and press the "on" button to check whether the steering is correct (in the face of the push dial, the push dial rotates counterclockwise to the correct direction), otherwise, block the power supply adjustment wiring.
接通水源，以备运用。
Connect the water source for use.
切丁机的操作运用
Operation and application of dicing machine
首要，应将被切物料洗净去杂，假如被切物料混有沙石与泥块，刀刃口与刀板简单损坏和磨钝。物料更大切开直径应不超越100mm，假如大于此直径须分块。
Above all, the cut material should be washed and removed. If the cut material is mixed with sand, stone and mud, the blade and blade are simply damaged and blunt. The maximum cutting diameter of material should not exceed 100mm. If it is larger than this diameter, it must be partitioned.
按下发动按钮电机作业。（如上盖未压合在机架上，不能压合开关XK，线路不通，电机不能作业）
Press the start button to operate the motor. (if the upper cover is not pressed on the frame, it can not press the switch XK, the line is blocked, and the motor can not operate).
将被切物料从料斗均匀接连投入进料斗中，在推料拨盘的效果下，被切片刀切开成所要求的厚度，接着被圆盘切丝刀切成条状，更终被横堵截刀切成方块。
The cut material is evenly connected from the hopper into the hopper. Under the effect of the pushing dial, it is cut into the required thickness by the slicer, then cut into strips by the disc cutter, and finally cut into squares by the transverse blocking cutter.
切丁机标准的调整：是通过调整切片厚度，替换圆盘切丝刀和横堵截刀来改动的。机器作业时，切勿将手及其他异物放入壳体中，以免发作风险。
Standard adjustment of dicing machine: It is changed by adjusting the thickness of slice, replacing disc cutter and transverse blocking cutter. Do not put your hands and other foreign objects in the shell when the machine is working, so as to avoid any risk.
以上新闻是由济南宏泰食品机械有限公司整理发布的想要了解更多切丝切片机的信息，请点击我们的网站：http://www.sdjnzlp.com。
The above news is organized and published by Jinan Hongtai Food Machinery Co., Ltd. For more information about the slicer, please click on our website: http://www.sdjnzlp.com.