全国咨询热线
双变频切菜机TJ-305可切长条状葱，大蒜，韭黄，芹菜，高丽菜，大白菜，鱼肉，豆干，菠菜，香蕉片，瓜类等。另更换切刀盘可切根茎类得蔬菜，如竹笋，萝卜，马铃薯等切丝切片。适用于食堂及蔬菜加工业者。下面就来介绍一下切菜机维护方法及注意事项：
Double frequency cutting machine TJ-305 can cut long strips of onion, garlic, leek, celery, kohlrabi, cabbage, fish, dried beans, spinach, banana slices, melons and so on. Cut the cutterhead and cut the rhizome of vegetables, such as bamboo shoots, radishes, potatoes and so on. It is suitable for the central canteen and the vegetable processing industry. Next, let's introduce the maintenance methods and matters needing attention:
1、平时于操作完毕须注意清洁的工作。
1, usually after the operation must pay attention to the cleaning work.
2、定期为输送带的轴承处加润滑油。
2. The lubricating oil is added to the bearing of the conveyer belt regularly.
3、 此机台有更好之性能，如果客户使用时，注意各种保养及操作技巧，它将是一得力助手，须特别注意，勿放入石粒或金属物于入料口。
3, this machine has the best performance. If the customer is used, pay attention to all kinds of maintenance and operation skills, it will be a proper assistant and should pay special attention to not put the stone or metal in the entrance.
4、 有不正常运转及噪音时，须立即停止并检查。
4. Abnormal operation and noise should be stopped and checked immediately.
5、 清洗机器时，必须注意用水冲洗时不要冲洗在门的左下角有一个小孔，这是一个接触通电开关，如冲湿了，必需用干布擦干及用风筒吹干，否则会烧坏。
5. When cleaning the machine, you must pay attention to a small hole in the lower left corner of the door when rinsing with water. This is a contact switch, if it is wet, dry cloth must be dry and dry with the wind tube, otherwise it will burn.
6、 变频器的按扭不能随意乱按，乱按易坏。
6, the frequency of the button can not be arbitrary, press randomly.
7、 注意关门时门的左下小凸出柱必须插入正左边的小孔，如插不正，则不能通电。在使用进行中此起保险的作用。
7. Pay attention to the small left and small protruding column of the door must be inserted into the small hole on the left side if the door is closed. The role of this insurance in the use of the process.
8、 磨刀时可用扳手卸下刀反复研磨。在研磨过程中不能使刀过热以防退火。
8, the knife can be grinded repeatedly with a wrench. Do not overheat the knife during annealing process to prevent annealing.
以上就是关于切菜机的介绍，想要了解更多关于切菜机的知识，可以关注我们的网站，在网站中有更多知识的介绍，希望能为你提供帮助！
The above is about the introduction of the cutting machine, want to know more about the knowledge of the cutting machine, we can pay more attention to our website, there are more professional knowledge in the website, I hope to provide help for you!
